Skip to main content
F3D
Giá đỡ tấm sheet mở rộng cho Prusa Enclosure 1

1 image

Máy In 3D

Giá đỡ tấm sheet mở rộng cho Prusa Enclosure

Remix of Giá đỡ tấm thép có thể mở rộng (MK & MINI) By Whity

By TrellaxTD

Downloads
136
Likes
101
Views
2,314

Files 7 414.6 KB

  • Sheetholder_left_bottom_1777831937.3mf3MF · 45.4 KB
  • Sheetholder_right_bottom_1777831938.3mf3MF · 50 KB
  • Sheetholder_left_bottom_1777831939.stlSTL · 86.8 KB
  • Sheetholder_right_bottom_1777831939.stlSTL · 80.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Remix of Whity's model to fit ontop of the Prusa Enclosure.

Printer settings

Printed with 0.2 layer hight and 20% infill. Support is only needed for the bottom parts

The sheetholder bottom parts are designed to put in 5x5x2 magnets to stick better to the top of the enclosure. The magnets must be inserted while printing.

Assembly instructions

First remove the middle cover in the top metalplate of the enclosure by removing the nylon rivets.

Than put in the two printed bracket parts in the hole and secure them with the two nylon rivets you removed in the step before.

The left bottom part is secured with a M3x8 countersunk screw. It replaces the M3x5 hex screw far left in the upper frame of the enclosure.

The right bottom part is secured with a M3x12 hex screw. It replaces the M3x5 hex screw on the far right in the upper frame of the enclosure.

After the bottom parts are installed you can stack multiple of Whity's sheetholders ontop of each other.

Read more Show less

Print spec

Formats
3mfstl
Model files
7
Total size
414.6 KB
Largest file
127.3 KB

0 comments

See all