Soap Dish Parametric – Khay Đựng Xà Phòng Parametric (Fusion 360)

Soap Dish with Tray Insert

This soap dish consists of two pieces:

1. The dish in square format with a cutout to allow excess water to flow out
2. The tray with hexagonal cutouts for the soap to rest on

The model above was printed in Prusament Galaxy Black PLA, which fits rather nicely into our bathroom.

Parametric Fusion 360 Design

In the file section you can download a *.f3d file, which can be used to adjust many dimensions of the design in Fusion 360.

This is achieved using “User Parameters”, accessed by ‘Modify’ → ‘Change Parameters’.

Use the “Favorites” Parameters to adjust the model to your liking. The comment contains a description what the parameter is controlling. If you go crazy, the model may break, but it can accomodate a wide range.

Noteworthy may be the “print_layer_height” and “print_layer_width” parameters. They are used to adjust the other dimensions to a multiple of layer height and width of your printer. In the example above, I've used 0.2mm layer height and 0.45mm layer width, which printed very nicely on a MK4 using PLA.

Below two adaptations

This is my first foray into fusion 360 and parametric modelling. Constructive feedback is welcome.