Skip to main content
F3D
Weather-witch – Cánh gió (wind vane) hình phù thủy thay được 1

3 images

Large file collection Đồ Gia Dụng

Weather-witch – Cánh gió (wind vane) hình phù thủy thay được

By Claus_343526

Downloads
122
Likes
24
Views
610

Files 21 2.9 MB

  • Witch_1777810488.3mf3MF · 128.4 KB
  • Pointer_1777810489.3mf3MF · 61.4 KB
  • Pointer_tip_1777810490.3mf3MF · 187.9 KB
  • Top_nut_1777810491.3mf3MF · 193.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Can be assembled without the use of glue

In addition to the 3D printed parts that must be used:

  • 2 x M4x35mm, nut and washer. 
  • 1 x Ø2 mm bicycle spokes in stainless steel (> 11cm). It may well be an old cracked spoke, as only the threaded end must be used. 
  • 1 pearl etc. to reduce the friction between pointer and top
  • 1 x Ø16mm rod or pipe in suitable length
  • 1 zip tie
  • Around 20cm 1,5mm2 massive copper wire, etc. to hold the parts together.

To reduce the friction between pointer and top, a pearl or other is inserted

A bicycle spoke is used as the vertical axis. The axis must be approx. 85 mm, plus height of the pearl. The axle/spoke is bent 90° to the horizontal. The horizontal pieces must be approx. 20 mm to fit in to the Branch A 

Wind vane with a picture of a witch is fixed with a zip tie. By not gluing it, it can be changed to another image

The other parts are attached with solid electric wire, steel wire, nails etc.

Read more Show less

Print spec

Formats
3mf
Model files
21
Total size
2.9 MB
Largest file
448.6 KB

0 comments

See all