Iphone Lamp – Đèn gắn iPhone

Phone Lamp

This is a lamp for you're phone. To create this lamp I was very inspired by the project of Nazzareno Ruspolini who created a series of mini lamps to attach to the flash's phone made with SLS printing. I made a printable version with FDM printing.

Project of Nazzareno Ruspolini: nazzarenoruspolinidesign.com/index.php?id=1&dettaglio=53

The .STL file
The uploaded version (Iphone Lamp.stl) works on an iPhone 13 with a silicone cover. I've also uploaded the Fusion 360 file so anyone can find the perfect snap size for their phone
The green part need to be removed after the print

Instruction for change the dimension of the attachment

       1 - Open the file (Iphone Lamp.f3d)
       2 - Open the Parameters tab 
       3 - Change the Height (11mm by default)
       4 - Export the file as .stl and print

Printing Settings

The only important settigns to change are the supports, because in the model there is already a support (the green part) and must be added other supports in the slicer which are explained in the following steps. I use Prusa Slicer the steps are the same in other slicers too.

1 - Add custom supports

2 - Change the type of supports

If you have problems, suggestion or everithing else please write me.

Enjoy Printing!