Skip to main content
F3D
Redux: Phụ kiện gắn mũ cho Quest 2 (Helmet Attachment) 1

8 images

Dụng Cụ Tiện Ích

Redux: Phụ kiện gắn mũ cho Quest 2 (Helmet Attachment)

Remix of Ngàm gắn nón cho Quest (Quest Helmet Attachment) By Chris_303543

By spiggytech

Downloads
103
Likes
39
Views
1,681

Files 8 5.4 MB

  • mod_NVG_VR_Mount_Redux_v3_V3_CapShort_redux_1777797219.stlSTL · 285.5 KB
  • mod_NVG_VR_Mount_Redux_v3_V3_Cap_redux_1777797220.stlSTL · 333.5 KB
  • mod_NVG_VR_Mount_Redux_v3_V3_Lock_redux_1777797221.stlSTL · 113.6 KB
  • mod_NVG_VR_Mount_Redux_v3_V3_HelmetMount_redux_1777797222.stlSTL · 1.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Small adjustments to @Chris_303543 very badass design. To complete this project, you will still need to download and print the non-included components. Please get the V3 components. I've also added my own knurled “screw fasteners”. I prefer nylocks as they are not likely to loosen. 

Print in ASA, 15% honeycomb, +4 wall, 0.20mm layers. Use a brim for adhesion if necessary. Print with different colors for badass contrast. Complement a stranger and give them a high-five for all around good vibes. 

BOM: 

Stuff you will use from above:

  • 5x M4 Nylock nuts
  • 3x M4 Standard nut
  • 2x M4x8mm Screws
  • 3x M4x30mm Screws
  • 3x M4x35mm Screws
  • 2x 1/4in x 13/32in Compression Springs
  • 2x M4 Washers

Assembly:

Print Parts! Use the V3 set from Chris' project. Replace the duplicates with my redux components. Use his instructions. 

Helmet used: FMA Airsoft Helmet

Read more Show less

Print spec

Formats
stl
Model files
8
Total size
5.4 MB
Largest file
1.3 MB

0 comments

See all