Nẹp & kẹp panel Crusader (dành cho 2020 extrusions)

ABOUT CRUSADER PANEL BRACES AND CLIPS

Crusader panel braces and clips are designed for 2020 extrusions with primary aim to secure back panel BUT can be used for any panel of your choice.

These braces and clips are designed with one aim only — to provide as much sturdiness as possible and secure panels as tight as possible. Designed for Voron and more. Your ADXL tests might love these as rattling panels are common cause for vibrations leading to VFA's at higher print speeds.

(Visualisation does not represent actual proportions for 250 and larger size frames. Check “Makes and Comments” section for more representation as IRL.)

Version for 4mm panels; and 4mm panels + (very) beefy foam are provided in REV1.
STEP file is published as well, feel free to mod/remix.
 

BOM (bill of materials)

Mechanical parts

QTY

M3x8 SHCS/DIN 912 Bolts (Source: INT)

14

M3 Hammer head T-Nuts (Source: INT)

14

Printed Parts

Braces

4

Clips

6

ASSEMBLY MANUAL

Tighten screws until you see plastic crack, then ½ turn back. Re-print and repeat until succeed. (Just in case — this is not an advice.)
 

A BIT OF VIDEO SHOWCASE

SUPPORTED PRINTERS

Any printer using 2020 extrusions and dimensionally compatible.

PRINT GUIDELINES

Here are print guidelines for you to follow in order to have decent success with printing parts:

3D PRINTING PROCESS

Fused Deposition Modeling (FDM)

INFILL TYPE

Grid, Gyroid, Honeycomb, Triangle or Cubic

MATERIAL 

ASA, ASA-CF, ABS, ABS+, ABS-CF or PETG

INFILL PERCENTAGE 

40% - 60%

LAYER HEIGHT

Recommended: 0.2mm

WALL COUNT 

Recommended: 4

SOLID TOP/BOTTOM LAYERS

Recommended: 5

EXTRUSION WIDTH

Forced 0.4mm

CREDITS AND ACKNOWLEDGEMENTS

Design of the panel brace is heavily inspired by Jeoje's sturdy handles. Some say they will fit very well together.
 

CHANGELOG

Date

Change

02.01.2024

Initial version (Rev1)