Kẹp điện thoại gắn tripod

This should work with phones ≤83mm wide.  2 mounting points for portrait or landscape.

Print: .28 layer height and 15 walls.  No top/bottom layers, infill or supports.

What you need:  flat head 2" machine screw ¼ -20  , 4 nuts, and glue.  

Match the bottom nut thread to your tripod post.

Assembly:

press 3 nuts into the base

thread the screw into the top nut

snap the jaw onto the head of the screw

glue a nut on the end of the screw leaving 5mm of exposed threads

glue the handle onto the nut

Now channel your inner Ansel Adams…