DJI Neo 2 Drone Case

A 2 part case for the DJI Neo 2 Drone. It allows the digital transceiver and antenna to stay attached to the drone when transporting it. The top slips onto the case with a retaining tab to secure it in place.

The tab that slips into the hole on the side to secure the top is printed separately so that the layers are in the correct orientation to be able to flex without breaking. The tab is glued in place. I used epoxy.

I tried printed it using ABS but there was too mush warping so I used PETG:

.24mm Draft, 4 Wall Loops, 25% Sparse Infill