Skip to main content
F3D
Núm vặn tay (Knob) cho bu-lông lục giác chìm M2–M6 (socket) 1

2 images

DIY

Núm vặn tay (Knob) cho bu-lông lục giác chìm M2–M6 (socket)

Remix of Đầu vặn tay (knob) cho ốc M6 - Thay thế ốc cánh bướm tiện lợi By edmar

By olekhal_1291501

Downloads
292
Likes
26
Views
2,446

Files 6 6.1 MB

  • knob-thumb-screw-M2-socket_1777789128.stlSTL · 776.3 KB
  • knob-thumb-screw-M3-socket_1777789129.stlSTL · 776.3 KB
  • knob-thumb-screw-M4-socket_1777789131.stlSTL · 776.3 KB
  • knob-thumb-screw-M5-socket-screw_1777789132.stlSTL · 776.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#370819
Category
DIY
Published

Description

I liked the original design made by edmar, but required the hex section to protrude from the suface. Storing the knobs together with the bolts, removes the need to track down suitable bits / allen keys when you need it. Depending on yor use case, you may still need to find one to properly tighten the bolts.

After a quick adjustment in Fusion 360, made a scaled set for M2, M3, M4, M5 and M6 bolts.
The M2 version is tiny, and may end up as useless. The one I printed do work.

Print details
All models where printed with the same basic settings.
M2 and M3 knobs printed without any height modifier.
M4, M5 and M6 printed with heigth modifier.

Permieters: 3
Infill: 20% rectilinear
Top layers: 3, monotonic pattern
Bottom layers: 3, monotonic pattern

M4 Height modifier info
Start height: 9 mm
End height: 11.2 mm
Perimeters: 4
Top layers: 0

M5 Height modifier info
Start height: 12mm
End height: 15 mm
Perimeters: 6
Top layers: 0

M6 Height modifier info
Start height: 15mm
End height: 19 mm
Perimeters: 7
Top layers: 0

Read more Show less

Print spec

Formats
gcodestl
Model files
6
Total size
6.1 MB
Largest file
2.3 MB

0 comments

See all