Giá đỡ 3D Touch Probe Holder

I wanted an easy to use holder for my 3D Touch Probe.  The probe is used at the start of each work session or work piece, and I wanted something easy to grab and easy to return to its holder when complete.  The probe is connected via a USB cord that exerts some force, so needed to shape the holder so the probe would not come loose.

Probe Mount should be printed in the orientation it is modeled.  It will need supports from build plate only.  Since that is a single flat, surface, the supports are easy to remove.

Printed in PETG using 0.4 nozzle and 0.2 layer heights.

Used M3-sized bolts - but for mounting I used wood screws.

FreeCAD design file, step file, and STL included.