
Kobo Clara BW & Color - Bộ linh kiện ốp GLoA cho E-Reader
- Downloads
- 29
- Likes
- 4
- Views
- 867
- Remixes
- 0
- Comments
- 0
Files 13 5.8 MB
- GLoA_-_6_-_Kobo_Clara_BW_Color-CBC_Arm_L_1777721857.stlSTL · 384.8 KB
- GLoA_-_6_-_Kobo_Clara_BW_Color-CBC_Arm_R_1777721858.stlSTL · 429.3 KB
- GLoA_-_6_-_Kobo_Clara_BW_Color-CBC_Sleep_1777721860.stlSTL · 854.1 KB
- GLoA_-_6_-_Kobo_Clara_BW_Color-CBC_Back_1777721862.stlSTL · 1.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #365732
- Category
- Dụng Cụ Tiện Ích
- Published
Description
These are meant to be replacement parts for the GLoA E-Reader cases we are selling on 16 Bit Store. If you'd like to buy a pre-made case we are selling them at http://16bitstore.com
If you wish to make your own case, you'll need to design your own cover, however here are the parts you'll need to complete the shell.
+ 8 - IUTA or IUTB threaded inserts. I got mine from Mouser, Both the M2 and the #2-56 insert works
https://www.mouser.ca/ProductDetail/SI/IUTA-M2?qs=7MVldsJ5Uaw%252Bi7Fy%252BHDedA%3D%3D
https://www.mouser.ca/ProductDetail/SI/IUTA-256?qs=7MVldsJ5UawQuw0J58lUSg%3D%3D
+ 8 - 4mm M2 or 3/16" #2-56 Flathead Machine Screws. We designed it for 3/16" of clearance and the arms are 1mm thick so long as the screw is between 1.5mm and 3/16" it'll work
+ 1 - 1/4" × 1/10" Rare Earth Magnet, though you can probably modify the design to fit wider 10mmx2mm magnets instead.
If you want ideas on how we made the cover, we have a playlist on YouTube showing how we stitched one together here:
If you want to modify the case the FreeCAD models are available on github here: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/GLoA%20E-Reader%20Cases/6%20inch
Print spec
- Formats
- stlsvg
- Model files
- 13
- Total size
- 5.8 MB
- Largest file
- 2.4 MB
0 comments
You may also like 12 models
See all-
New -
New -

-
New -
New -
New -

-

-

-

-

-

