Skip to main content
F3D
Hộp đựng cho Tascam Portacapture X8 1

16 images

Dụng Cụ Tiện Ích

Hộp đựng cho Tascam Portacapture X8

Remix of Hộp Công Cụ Miễn Phí Dành Cho Người Dùng Việt Nam By Whity

By Miraculix_1826219

Downloads
26
Likes
9
Views
361

Files 8 2.5 MB

  • Case_Bottom_1777701506.stlSTL · 1.5 MB
  • Lid_1777701507.stlSTL · 601.1 KB
  • Writing_1777701509.stlSTL · 229.6 KB
  • Inner_Lid_1777701510.stlSTL · 45.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The Tascame Portacapture X8 isn't shiped with any form of casing in the box and I wanted one which can hold all the naseserry equipment for it. So I put an inlay in one of Whity's Rugged Boxes for the Portacapture X8 itself along with compartments for a Shock Mount by Rycote, space for a set of spare batteries and six cabinets for other things such as cables, adapters, dead cat,… five of them with clippy lids in the lid and a deeper one in the main body.

I put a sheet of 2mm foam on the bottom of the main compartments for the Portacapture and a piece of 5mm sticky foam on the lid so the recorder doesn't rattle around in the box.

The seal is optional. I printed mine with TPU

6x M3x25 screws are needed for the laches and the hinges

I put a drawing of the inlay as a PDF file up, so you can test the fit with your gear before printing and you can use it to cut out the foam inlay if you want.

For anyone who wants to test the clippy mechanism on the lids, I put a model with just the frame for the lids, so you can test it befor the 20+h print.

Read more Show less

Print spec

Formats
pdfstl
Model files
8
Total size
2.5 MB
Largest file
1.5 MB

0 comments

See all