Skip to main content
F3D
Vỏ (Housing) ESTLCAM-LPT-Adapter Housing 1
Vỏ (Housing) ESTLCAM-LPT-Adapter Housing 1
1 / 10

10 images

DIY

Vỏ (Housing) ESTLCAM-LPT-Adapter Housing

By FokieH_Print

Downloads
25
Likes
1
Views
137
Download all (.zip)· 4 files · 5.3 MB· 5.3 MB

Files 4 5.3 MB

  • 20250408_EstlCamGehaeuse-Set-V3_1777675886.3mf3MF · 195.8 KB
  • Gehaeuse_Oben-V3_1777675888.stlSTL · 2.2 MB
  • Gehaeuse_Unten-V3_1777675890.stlSTL · 1.6 MB
  • 20250408_EstlCamGehaeuse-Set-V3_0.4n_0.15mm_PETG_MK4S_1h24m_1777675891.bgcodeBGCODE · 1.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#360922
Category
DIY
Published

Description

Hier findet Ihr ein Modell eines Gehäuses für den ESTLCAM-LPT-ADAPTER (Classic). 

Im Unterteil werden 4 Gewindeeinsätze M3 eingeschmolzen, danach der LPT Adapter mit 4x M3x6mm Schrauben verschraubt und danach das Oberteil seitlich aufgeschoben. Dieses verrastet dann mit dem Unterteil.

Gedruckt wurde das Ganze ohne Stützmaterial aus Prusament PETG im Profil 0,15mm Structural.

Viel Spaß beim Drucken! Wenn Euch das Modell gefällt würde ich mich über ein like freuen.

Here you can find a model of a housing for the ESTLCAM-LPT-ADAPTER (Classic).

Four M3 threaded inserts are melted into the lower part, then the LPT adapter is screwed in place with four M3x6mm screws, and then the upper part is slid on from the side. This then locks into place with the lower part.

The entire thing was printed without support material using Prusament PETG with a 0.15mm structural profile.

Have fun printing! If you like the model, I would be happy if you leave me a like

Read more Show less

Print spec

Formats
3mfbgcodestl
Model files
4
Total size
5.3 MB
Largest file
2.2 MB

0 comments

See all

F3D uses essential cookies so the site works. Accept all also turns on marketing cookies for traffic and ad measurement; Essential only does not. You can change this in Cookie settings. Read the cookie policy