Skip to main content
F3D
Ngàm gắn GoPro trên cằm cho nón IXS Trigger FF 1

2 images

Thể Thao & Ngoài Trời

Ngàm gắn GoPro trên cằm cho nón IXS Trigger FF

By Philip_4410841

Downloads
175
Likes
9
Views
853

Files 2 2.4 MB

  • IxsGoproMount_1777630593.stlSTL · 1.7 MB
  • IxsGoproMount_1777630593.stepSTEP · 687.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#357855
Published

Description

Simple gopro (chin) mount for ixs trigger ff helmet. Optimized for minimum intrusion inside the chin guard, since there is not too much space between the helmet and my chin there.

Print preferably with high infill (>80%) and in PETG, ASA, ABS, Nylon... for maximum robustness, although PLA will work too.

A M5 nut for the gopro connection is required, but may have a tighter fit. If this is the case, put the gopro (case) inside the mount and use the thumb screw to pull the nut into the corresponding indentation. If the fit is too loose, use some superglue to secure the nut (optional).

The mount ist strapped to the helmet with one or two narrow zipties (< 3mm width) which are guided by the mount itself. Place the end of the ziptie somewhere where it can't touch your chin while riding and have fun.

Imported from my thingiverse account

Note: This won't fit on the updated MIPS version of the helmet, but there is a remix for that version available on thingiverse: https://www.thingiverse.com/thing:6069311

Read more Show less

Print spec

Formats
stepstl
Model files
2
Total size
2.4 MB
Largest file
1.7 MB

0 comments

See all