Console màn hình 7 inch Elecrow cho Orange Pi 5B

Got the idea from here:

https://www.printables.com/model/328757-octoprint-console-raspberry-pi-3-b-5-inch-elcrow-t

But wanted to make it for 7 inch screen, and a orange pi 5b

Its still a work in progress but on first looks it seem to fit

I will use thread inserts to mount the orange pi. The switch on the right hand side will be for the screen back light toggle because I want to be able to control that still if it is mounted. 

PS: Please be nice it is my first upload and I'm not a real engineer. 

If any body is interested I can make a raspberry pi design as well. 

Update:

i changed the spacers for the thread inserts to create more room for the threat inserts.

per request i added a raspberry pi 4 variant. i created this with a friction fit because the holes around the gpio headers don't have a lot of flat PCB to create a base for threat inserts. 

the way the raspberry pi is intend to be mounted is gpio top 

you probably need a micro HDMI ribbon cable like this. because it may interfere with USB-c or audio 

https://www.amazon.com/Cablecc-Degree-Angled-Multicopter-Photography/dp/B01787LRFY/ref=sr_1_4?crid=A5JOIK8BI8SA&keywords=micro%2Bhdmi%2Bangled%2Bribbon%2Bcable&qid=1698784915&sprefix=micro%2Bhdmi%2Bangled%2Bribbon%2Bcab%2Caps%2C441&sr=8-4&th=1

update v2:

i made some minor changes to the orange pi design so it would fit better. also made the change there to the friction fit design i made for the raspberry pi variant.