Hổ Dễ Thương (HueForge)

I normally publish and update all my models at MakerWorld. They are only here on Printables to keep the accounts consistent.

Please download the newest version here at MakerWorld.

In the comments of my Low Poly Unicorn I noticed that your kids love it. So I made a painted unicorn, which is primary for the girls. So I needed to make something for the boys. Here it is.

You need 4 filaments to print/paint this 2D tiger: black, red, yellow and white. You just have to swap the filament 3 times, so no AMS or MMU required.

I used Bambu Lab Filament, but other brands will work, too. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Filaments Used:

• PLA BambuLab Basic Black Transmission Distance: 0.6
• PLA BambuLab Basic Red Transmission Distance: 5
• PLA BambuLab Basic Yellow Transmission Distance: 6
• PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:

• Start with Black
• At layer #12 (1.04mm) swap to Red
• At layer #16 (1.36mm) swap to Yellow
• At layer #29 (2.4mm) swap to White for the rest.

Generated using the HueForge software! See videos with instructions for filament swaps with Bambu Studio and PrusaSlicer …

… or try the included .3mf file.