Ốp lưng Samsung Galaxy A54 a546 case

Originally published here: Samsung Galaxy A54 a546 case by tato_713 - Thingiverse

Thanks to Johannas3D who helped me testing this case.

Some of the models are designed for rigid materials and others for flexible ones.The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.

For other phone cases check this.

Models that don't have the tags "_aired" or "_rugged" in the file's name, have their back thinner, so the camera is unprotected of hits in that part. Here is the explanation of the files names:

• Flex: made for elastic filaments like TPU. Requires support for the buttons and charger holes. Not tested. 
• Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA. 
• Aired: It is widely opened in the back so that the phone can dissipate the heat easily. 
• Rugged: Reinforced version, with lateral grip. 
• Banded: It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and bringing it a better grip.

References

• GSMArena