Ống thổi gió 5015 cho SV06

       Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.

                      https://www.youtube.com/channel/UCBjyI1E1HROh1BAYgeRZy7g 

         Support my work: (click on image)

                                            https://www.buymeacoffee.com/savagelau

         You can get commercial license from here:  (click on image)

                                                  https://www.patreon.com/SavageLau

______________________________________________________________________________________________________________

If you remix, please share under same liences! NO COMMERCIAL USE!

So, this design is come from my dual 5015 design. I removed one duct and make it works better. It should work faultlessly. In my test, it have greatly improve the part cooling efficiency. 

It should help you see better for the first layer. 

If you need instruction for wiring. Start at 6:55. 

Printing instruction:

Print with PETG, PC, CF, ABS. PLA won't work. 

Printing orientation as shown pic above. 

No support needed.

Part required: 

JST 1.25mm 2 Pin *1

m3*22 countershink bolts *2

m3*8 allen socket bolts *3

Instruction: