Skip to main content
F3D
Combo LCD Cover & HyperPixel 4 – Không tạo áp lực lên màn h… 1

4 images

Máy In 3D

Combo LCD Cover & HyperPixel 4 – Không tạo áp lực lên màn hình

By vlaine

Downloads
146
Likes
46
Views
2,257

Files 3 1.3 MB

  • HyperPixel-vlaine_1777489612.3mf3MF · 242.8 KB
  • HyperPixel-vlaine_1777489613.stlSTL · 827.7 KB
  • BackPlate_v12_1777489614.stlSTL · 219.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#352702
Category
Máy In 3D
Published

Description

This is a remix from this design
https://www.thingiverse.com/thing:3863115

For Hyperpixel 4 on Raspberry Pi 3 (I use a 3B+)

The original design required the printer to be on a concrete slab because the LCD cover was hanging over the edge.  This remix lays on the ground.  I did not modified the original backplate, but I am including it so you have all the files in one place.  The back plate requires 4 m3 screws (11 to 13 cm will fit nicely)

3mf included for easy printing.
You can ignore the warning that says that the toolpath is outside the print area.  Tested on my mk3s and it fits.

If you prefer to do it yourself :
Z rotation: 322.5
Fill angle: 10
Bridging angle: 280
Optional: Add  a box modifier over the X (kill switch) and adjust infill bridging angle (already included in the 3mf).

To rotate the screen image, add the following lines to your config.txt file:
dtoverlay=hyperpixel4,touchscreen-swapped-x-y=0,touchscreen-inverted-x=0
display_lcd_rotate=3

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
1.3 MB
Largest file
827.7 KB

0 comments

See all