Vỏ hộp cho AgOpenGPS PCBv4.xSTD v4 (Enclosure)

By Radmuffins_1268533

Downloads: 508
Likes: 9
Views: 2,204
Remixes: 0
Comments: 0

Download all (.zip)· 22 files · 37.5 MB· 37.5 MB

Files 22 37.5 MB

PCB_enclosure_v4_external_screws_1777482031.STLSTL · 5.9 MB
PCB_enclosure_v4_internal_screws_1777482033.STLSTL · 5.7 MB
PCB_enclosure_v4_panel_mount_1777482034.STLSTL · 5.7 MB
PCB_enclosure_v4_internal_screws_1.86mm_pcb_slot_width_1777482036.STLSTL · 5.7 MB
PCB_enclosure_v4_panel_mount_1.86mm_pcb_slot_width_1777482040.STLSTL · 5.7 MB
PCB_enclosure_v4_external_screws_1.86mm_pcb_slot_width_1777482041.STLSTL · 5.9 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #352405
Category: DIY
Published: 04/29/2026
License: Creative Commons — Attribution — Noncommercial
Tags: box
enclosure
pcbholder
pcbmount

Show more tags Show fewer tags

Description

Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. This version is fully 3d printable. You can choose from many face and back plates available. But F9P users can only connect antenna cable from back panel. This is to make enclosure small as possible (196x125x45mm), um982 with pigtails connectors can go to front panel. There is faceplate with hole for PG7 cable gland used for additional cables like external IMU. There are faceplates version with led holes, there is plug for them that can be printed from transparent filament, or you can use transparent tape over them if visibility of leds is important. PCB slot width is 1.76mm there are models with 1.86mm.

Mounting ways: double sided tape, M6 screws x4 or x2 for panel mount version, or self tapping screws where needed.

M3 screws 12mm x8 for faceplates.