Skip to main content
F3D
Bộ ốc vít M4 và đai ốc có thể sử dụng được 1

4 images

Large file collection DIY

Bộ ốc vít M4 và đai ốc có thể sử dụng được

By Ian_1684885

Downloads
3,437
Likes
89
Views
2,633

Files 22 48.1 MB

  • M4_5mm_Screw_1777476441.stlSTL · 807.1 KB
  • M4_Nut_1777476442.stlSTL · 892.9 KB
  • M4_6mm_Screw_1777476442.stlSTL · 1.9 MB
  • M4_7mm_Screw_1777476444.stlSTL · 1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#352256
Category
DIY
Published

Description

The M4 screws (which includes a nut) were CADed with the intent of being able to use them in low-stress situations. The screws should be similar to the goBILDA M4 screws, which you can use interchangeably with these 3D-printed screws, as shown in a picture above. 

Print Instructions:

I printed the screws on a Prusa MK3S+, which had a 0.25mm nozzle, using PLA. I used 100% rectangle infill, random seam position, a layer height of 0.1mm, and two perimeters. The print speed was 10-40mm/s. 

I have also tested printing the M4 screw using a 0.4mm nozzle. It works just as well as the 0.25mm nozzle.

Depending on the type of 3D printer you have, the printed parts might not work as advertised. But don't let that stop you from trying. If the M4 screws do not properly work, please let me know by leaving a comment. Happy Printing!

Read more Show less

Print spec

Formats
stl
Model files
22
Total size
48.1 MB
Largest file
4.8 MB

0 comments

See all