
Máy cấp liệu khô góc với nguồn cấp
- Downloads
- 573
- Likes
- 93
- Views
- 2,769
- Remixes
- 1
- Comments
- 28
Files 8 5 MB
- feeder_inside_1766464191.stlSTL · 299.9 KB
- feeder_outside_1766464192.stlSTL · 1.2 MB
- feeder_outside_pcxm10_1766464193.stlSTL · 1.1 MB
- feeder_outside_pcxm10_45_1766464194.stlSTL · 1 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #35161
- Category
- Máy In 3D
- Published
Description
Inspired by the design of sarman_1998 I created my own version which can be used in combination with PC4-M6 (and PC4-M10, see below) fitting PTFE tubing (6mm thread), and 2 M3 bolts + hexagon nuts.
The code can be changed to choose your own degree (or place a comment, and I will add a stl)
Items I used:
bolts: M3x10 DIN 7985 (cross) -> as long as it is flat at the side of the thread
washers: DIN9021 3,2mm washer (optional)
nuts: M3 DIN 985 (nylon locking nut) -> outside measures: 5.5 mm (parallel sides of hex), height 4.0 mm (2.4mm hexagon)
I decided to place the center of the holes at a fixed distance of 15mm from the tube-hole (so 30mm between both holes) to make it easy possible to replace them - if I need to do - for another design as long I keep using the same distance.
Thanks to motocoder also a template to drill the holes is included.
2018-09-03: Added a PCx-M10 outside for 10mm connectors, on request of bratej
2018-11-11: v1.1: Improved calculations for the position of the thread, relevant for an angle between 40° and 60°. Thanks to Arnaud.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer: PrimaCreator P120 v3 (Malyan M200)
Rafts: No
Supports: No
Resolution: 0.2mm layer 0.4mm nozzle
Infill: 20% Cube (Cura v3)
Print spec
- Formats
- scadstl
- Model files
- 8
- Total size
- 5 MB
- Largest file
- 1.2 MB
28 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-



