Hộp Gridfinity cho thước cặp & thước thép Mitutoyo (6x2)

I wanted a Gridfinity holder for my Mitutoyo caliper where the caliper lies fully flat so that its pointy bits aren't sticking out. Behold this immense 6x2 box!

Besides holding a 150mm caliper, it also includes two thin slots that are designed to fit two 150mm Mitutoyo steel rulers. (I mostly use them as X/Y size scales when taking reference photos.) I tested the model with the following items:

• Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper
• 2 × Mitutoyo 182-105 Steel Rule, 6" X 150mm

I think the sheer size of this case makes it a bit impractical as a tabletop tool holder – it is designed to live in a shallow tools drawer, not on top of a workbench. 

The case fits into the Gridfinity grid using a custom design inspired by @grizzie17's Gridfinity Refined and @rekk's Gridfinity Refried. You can push 6x2mm magnets in the nice press-fit magnet slots, or use a thumbscrew for a more permanent attachment. The thumbscrews printed from @grizzie17's files will fit this model, too.

Printing Instructions

This object is ~2mm too long to fit on the build plate of Prusa MK4 & i3 Mk3s machines. There may be a way to print it diagonally rotated, but I didn't feel like working out the angles, so I simply printed it into two pieces and clumsily glued them together. Good luck!