Spriteblower - Ống gió Dual 5015 cho Sprite Extruder

Need more part cooling for your Sprite extruder?  Spriteblower has you covered.  Smooth, short ducts create more laminar airflow for more consistent part cooling.

Note: If you use a CR touch, you need to relocate it with something like this.

Required parts:

• 4x M3x8 button head bolts (to attach duct to Sprite)
  2x M3x20 bolts (to attach blowers to duct)
  2x M3x4 threaded inserts (to attach blowers to duct, you could probably use a regular hex nut if you use longer bolts)

Print in the provided orientation.  Supports recommended but probably not required.