
Fitment Board – Bảng kiểm tra độ khít & dung sai lỗ
- Downloads
- 114
- Likes
- 11
- Views
- 637
- Remixes
- 0
- Comments
- 0
Files 6 1.8 MB
- Fitment_Board_1777425797.STLSTL · 459 KB
- Fitment_Board_0-1_1777425798.STLSTL · 730.5 KB
- Fitment_Board_1-2_1777425799.STLSTL · 528 KB
- Fitment_Peg_Round_1777425799.STLSTL · 20.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #350380
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
Use these boards to have a tactile feel to how much you need to oversize your holes in your design to obtain the desired “tightness”.
For example, with my printer, I need to oversize my hole by 0.4mm for a snug fit on circular parts and 0.8mm for a snug fit on square parts.
NOTE: The round peg and square peg have a diameter and width of 15mm.
NOTE 2: Fitment Board 0-1 and Fitment Board 1-2 may need to be angled diagonal on the build plate to fit.
NOTE 3: Fitment Peg_Rounded Square has a 0.5mm fillet at the corners to reduce “bulging” during printing
“Fitment Board” is for approximate fitment with tolerances of 0.0mm up to +1.2mm in intervals of 0.2mm.
“Fitment Board 0-1” is for more precise fitment with tolerances of 0.0mm up to +1.0mm in intervals of 0.1mm.
“Fitment Board 1-2” is for more precise fitment with tolerances of +1.0mm up to +2.0mm in intervals of 0.1mm.
Print spec
- Formats
- sldprtstl
- Model files
- 6
- Total size
- 1.8 MB
- Largest file
- 730.5 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-
New -

-


