Ngàm gắn scope Airsoft - Begadi "Competition"

NON-AFFILIATE LINKS:

Coustom scope riser for the Begadi "Competition" scope: https://www.begadi.com/zielhilfen/zielfernrohre/zielhilfen-zielfernrohre-begadi-competition-zielfernrohr-1-2-6-x-24-ir-30mm-mittelrohr-beleuchtet-inkl-killflash-montage-flipup-cover-schwarz.html

Top red dot: https://www.amazon.de/gp/product/B06W2PKXLT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Of course, other models also fit. This is supported by the customized washers. Please scale these for your scope.

Rubber bumpers have been used in the mounting clamps. Its a notch-integrated design.

Used m3 bolts that were laying around. All of them were cut to fit nicely.

M3 square nuts are embedded.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK4

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0,2

Infill:

100 %

Filament: Overture PLA Black

Notes:

Please print the "Mount" and the "Klemme_1" & "Klemme_2" upright to increase the strength. This might be difficult on your printer so make sure you are using a sufficient support density and organic support.

You can of course use materials other than PLA, but printing is quite difficult with all the embedded nuts and the upright orientation.

Category: Sport & Outdoors