Skip to main content
F3D
Regnans CoreXY – File CAD cho máy CoreXY custom dùng khung… 1

1 image

Máy In 3D

Regnans CoreXY – File CAD cho máy CoreXY custom dùng khung X5SA Pro

By Martin_au

Downloads
258
Likes
55
Views
4,320

Files 6 49.2 MB

  • Regnans_Rebuild_of_X5SA_Pro_1777358360.stpSTP · 48.7 MB
  • Carbon_rails_centring_guide_1777358363.stpSTP · 26.2 KB
  • Carbon_nuts_holder_1777358364.stpSTP · 31.9 KB
  • Carbon_Extrusion_Drill_Guide_1777358365.stpSTP · 88.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is the CAD file for the Regnans CoreXY. 

Regnans aims to achieve a very balanced machine combining simplicity, performance and a large build volume. It is designed with several principles in mind:

  • Simple design and maintenance. All parts are easy to access. It doesn't require Klipper, networking, extra processing. Everything is done using a basic board like an SKR 1.4 or Octopus (now that Marlin has input shaping).
  • 24V everything. In some countries, working on mains power requires a licensed electrician. Regnans is designed so that everything beyond the main power supply is 24V
  • Big build volume. The original X5SA can achieve 330x330x400. Regnans expands that to 350x350x430 by making use of smaller motion system components, and a compact extruder.
  • Performance - Won't get to VZBot speeds, but can still outrun most hotends. Machine limits are typically set at 350mm/s and 10-20k accel.
  • Must be quiet. Had to be similar in quietness to my Prusa Mk3s.
  • Relatively easy to enclose. Most main components are now inside the old X5SA frame. 

Regnans is designed to use:

  • SKR 1.4 or Octopus Pro (SKR 1.4 requires an older electronic case design)
  • 2209 drivers
  • Mini 12864 and/or BTT TFT35v3.0
  • BTT 30A mosfet for the bed
  • Keenovo Silicone Heater Pad 330mm X 330mm for Tronxy X5S
  • A 350x350 bed (I used a 6.25 Alca 5 tool plate)
  • Dragon HF hotend
  • LGX Light Extruder (The extruder sits on a small carrier, so can easily be redesigned for other small extruders)
  • A Meanwell UHP-750-24 power supply (Or cheaper alternative. I wanted a fanless PS, but the UHP is not cheap).
  • Carbon fibre gantry and MGN9 rails for X and Y

The build can (probably) be done in stages. The order that would probably work is this (but be aware I built this over a long time and can't guarantee that this won't conflict with original parts).

  • Electronics (swap X5SA with updated electronics)
  • Power Supply (upgrade the 500W power supply to the 750W needed for the bed)
  • Bed (but not the inboard rods and motors)
  • Gantry/extruder/hotend/etc
  • Inboard bed rods and motors (to bring the bed entirely inside the frame)
     

This is not a simple build. It requires drilling and tapping the rails of the X5SA and drilling and cutting the carbon tube. I've included templates for drilling. 

Firmware: https://github.com/Mjankor/Regnans

Read more Show less

Print spec

Formats
stp
Model files
6
Total size
49.2 MB
Largest file
48.7 MB

0 comments

See all