Giá đỡ hotend E3D V6 cho máy in Ultimaker 2

Parts needed:

One - Screw M3x10 : to fasten cable clip to mount

One - Screw M3x35 : To fasten hotend to mount

One - Threaded insert M3x4 : For M3x35 screw can have better grip

Four - Grub screw M3x4 : To tighten bearings to mount

Four - Screw M2/M2.5x8 : To fasten blower fans to mount

Two - Blower Fans 3010 : for part cooling

One - Fan 3010: To keep heat sink cool

Additional notes:

• Use button head M3 screws
• I just used PLA with no issues even printing at 250C
• To get full printing area you will have to angle y endstop back
  • TODO: add picture
• Used 2.85 heatsink and titanium heatbreak
  • https://www.matterhackers.com/store/l/e3d-v6-heat-sink-3.00mm-with-bowden/sk/M7D3E128
  • https://www.matterhackers.com/store/l/e3d-v6-titanium-heat-break/sk/MX1YSTJ6
• This was designed to use CHC hotend
  • https://trianglelab.net/products/chc-kit-ntc-100k-b3950-thermistor?VariantsId=10311
  • And one handed nozzle change
• If you want a longer melt zone use volcano (or volcano CHT) nozzle with extender
  • https://trianglelab.net/products/rapido-zone
• Using CHC Pro with 115 watts on ultimaker 2 will cause power resets
  • Unless you pre-heat nozzle to 100C before starting to heat bed
• Will have to look in to chcb support:
  • https://www.aliexpress.us/item/3256805600548540.html