Giá đỡ hàn và bùi nhùi đồng Gridfinity 1x2

This is a little Gridfinity model I have made that can hold your active soldering iron, and has a tray for a brass cleaning wool type thing.

I'm using it for my Pinecil (V2), but it should also work with the TS-100, and similar small-sized soldering irons.

i used a generic 608 bearing for the ring.

UPDARE 03.10.2023:

• Increased bearing diameter from 22.0mm to 22.1mm

UPDATE 29.09.2023:

• Made the ring thicker again
• Added a small lip to the bottom of the ring to prevent the bearing from falling out

UPDATE 02.04.2023:

• Made the sidewalls a lot higher, so that little bits of solder don't shoot out as easy.
• Reduced the thickness of the ring.

UPDATE 24.02.2023:

• Added version for M3 Countersunk screws

UPDATE 21.02.2023:

• Remade the entire F360 project file using this Gridfinity Add-in for Fusion 360.
• F3D & STEP files are now proper project files.
• The bin now has proper Prusa-style screw holes!
• Some dimensions are now slightly different.