Skip to main content
F3D
PrusaV - Bass (Bass kiểu Flying V) 1

10 images

DIY

PrusaV - Bass (Bass kiểu Flying V)

By spikeon

Downloads
170
Likes
40
Views
1,514

Files 6 7.9 MB

  • Hex_Wing_-_Large_Format_1777334833.stlSTL · 558.9 KB
  • Body_-_Large_Format_-_Glarry_1777334834.stlSTL · 2 MB
  • Control_Panel_Cover_1777334836.stlSTL · 198.7 KB
  • Body_-_Large_Format_-_Offset_1777334837.stlSTL · 1.8 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Have you ever wanted to print a Bass?  How about a Flying V style Bass?  Maybe one with a Hex wing?  Look no further!

Slicer Settings

The PrusaCaster recommends using at least 7 walls, top layers, and bottom layers, as well as 25% infil for a basic guitar.  For my print of this, I used 15% infill globally, and then modified the center of the guitar to be 25%, and made the bridge and neck mount points 100%.   I have attached a .3mf file of this. 

This is a large print, and It was designed for a large printer; specifically the Elegoo Neptune 4 Max .  You will need to slice it up to print it on a smaller printer.  If anyone does this and builds it and has success with it working, please send them to me 

IMPORTANT NOTE: Make sure you get the Body file to match the Neck plate you purchase.  If you choose the salvage option, use the “Glarry” Body file.

Parts List: 

Build Your Own:

Salvage

You can buy this bass and take it apart to get all of the pieces you need besides the screws for the control panel access

https://amzn.to/49gHzO0 

Sources

Heavily Influenced by PrusaCaster and Prusacaster 2077 but designed from scratch.

Read more Show less

Print spec

Formats
3mfstl
Model files
6
Total size
7.9 MB
Largest file
2 MB

0 comments

See all