Dời PSU Ender 3 Pro vào đế máy in (printer base) - bracket gá

Two brackets that allow you to mount your Ender 3 Pro PSU inside of the printer's base. This will not fit on the regular Ender 3, as it uses a different PSU.

Bolts that you will need:

• 4pcs M5x16 to screw into 40x40 aluminum extrusions (I was able to screw them in without tapping),
• 2pcs M4x10 for attaching PSU to the brackets (from the back),
• 1pc M4x6 for attaching PSU to the brackets (from the top),
• rest can be reused from the stock PSU mount.

Printing tips:

• Recommended filament: PLA or PET-G (ABS or similar can be used if you can print these relatively tall parts without issues such as layer separation),
• a big nozzle (0.6mm or larger) is recommended,
• no supports needed.