Skip to main content
F3D
Giảm thiểu tắc vòi phun cho máy in Bambu Lab P1P/P1S 1

5 images

Máy In 3D

Giảm thiểu tắc vòi phun cho máy in Bambu Lab P1P/P1S

By Rick269

Downloads
127
Likes
35
Views
1,822
Comments
8

Files 1 79.3 KB

  • Bambu_Lab_hotend_fan_insulator_1766466564.stlSTL · 79.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#34586
Category
Máy In 3D
Published

Description

This is my attempt to help minimise nozzle clogging in my P1P, which seems to be a fairly common issue with Bambu Lab printers.

One of the theories is that heat from the bed/model is being drawn up into the (relatively small) hotend cooling fan, which reduces its efficiency and ability to cool, especially when dealing with high bed temperatures. This simple cover should help with this.

It is held on with the two screws which hold the hotend fan on. The easiest way to fit it is to unload the filament, remove the two screws which hold the hotend assembly in, and pull it down so you have enough room to unscrew the fan screws. Fit the "insulator" piece and then do up the fan screws.

To make this job even easier, check out my toolhead cover hook :) https://www.printables.com/model/502168-bambu-lab-p1p-toolhead-cover-hook

I printed in PETG-CF but you can print it in whatever filament you like, except PLA (it's likely to melt)

If you give this a try, please leave a comment on whether you find it useful or not. I do not believe that this piece can cause any harm, so it's worth a try.

NOTE: Unfortunately, this will not fit an X1, as the lidar sensor is directly behind the fan.

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
79.3 KB
Largest file
79.3 KB

8 comments

See all