Insert trong vỏ cho RAK Wisblock - Meshtastic

** You can purchase this already printed/assembled from my store by clicking HERE **

UPDATE: New STL uploaded with threaded posts for the new PCM model from voltaic enclosures

UPDATE2: New STL uploaded with GPS location moved to point upward for vertical mounted nodes; reworked bottom mounting notch to make more room for connectors.

This insert works for the RAK Wisblock starter kit w/ GPS Module and 2x 18650 batteries. I also recommend running some type of PCM to prevent overcharging the batteries on the top end, and also preventing undervoltage to the wisblock preventing damage.

Required Hardware:

• RAK 19007 & RAK4631

• YETLEBOX Enclosure (5.91" x 3.94" x 1.73"): https://a.co/d/1gAKfkj

• Two (2) 18650 Batteries: https://a.co/d/fJWL7UV

• Battery Tray: https://a.co/d/bXWjR2Z

• Two (2) M4x6 screws (Secure Backing Plate to enclosure)

• Four (4) M3x4 screws (Secure double 18650 battery tray to enclosure)

Optional Hardware:

• RAK GNSS Module (GPS)

• 4Pack Rubber Magnetic Feet: https://a.co/d/atZhPoL

• Flushmount USB-C Connector: https://a.co/d/hXoxCu0

• Breather Vent: https://a.co/d/btAd3CH

• Battery Protection Module (PCM): PCM