Kê Cao (Riser) cho Original Lack Enclosure

This design is for anyone who needs some extra space after building the original lack enclosure.  This does not require any additional hardware and you don't have to throw out any parts you have already printed.  You will have to relocate the handles to the top of the enclosure.

If you made no other modifications to the original design.  You will need to print out:

• 1 x Riser_Corner_Passthrough
• 3 x Riser_Corner
• 1 x Riser_Door_Latch(option of securing directly to Lack table)
• 3 x Riser_Connector

Parts are designed with dovetail edges so they can slide together without the need for glue.

If you need a Riser_Corner_Passthrough for the opposite side just mirror the image in your slicer software.

Printing recommendations:

• Print supports for Riser_Corner_Passthrough for the passthrough portion.
• Print Riser_Connector upright with a brim

Update 04/07/2024: Added Riser_Front_Latch - Allows the ability to attach magnetic latch from Original Design to riser using screws or glue.