Mod nút LED Anycubic cho Kobra 2 series (Kobra 2/Pro/Plus/Max)

Just Posted this today will update with full write up. Will be finished in next day or so. 2/19/2024 Will take Pre-Release off when post is 100% complete. Everything that is posted is ready for download and functional.

Snap Fit Version: The Enclosure Is a very tight fit so does not come off. Will require force to install the first time after that it will wear in. 

Print Instructions:

• 20% Infill
• 4  Perimeters also called Wall Loops 

I noticed alot people made these but no body released, So they say that imitation is the sincerest form of flattery… big thanks to Matthew Rochester,  Domenico Casalboni and Djmas Mas for coming up with the idea, here’s my go at it.

I recommend using the 24v Setup over 12v just cause you don't have to step down voltage Just listing both options for you to choose. 

Disclaimer: You do this mod at your own risk. If you do this mod I highly suggest you install a fuse in line with the power. In case of short circuit or ground to help prevent a fire. All sizing of wire and fuse is your responsibility.  As your need may vary with how many LEDs you choose to install.

24v Setup 

• 16mm Stainless Steel Latching Push Button

• Fuse Holder 
• Fuse Holder Inline
• 18AWG Wire 
• Expandable Braided Cable Sleeve This is enough to do your entire printer.  ¼ will work for just Leds
• 24v COB LED Strip

12v Setup

16mm Push Button Latching Switch w/wire: https://www.aliexpress.com/item/3256804579519805.html…

3 Options 2 step voltage down from 24v to 12v (Pick one)

1. 12V/3A Power Adapter: https://www.aliexpress.com/item/3256802164880804.html…
2. LM2596S DC-DC Buck Converter (No Soldering Required)
3. LM2596 Buck Converter Step Down (Soldering Required)

• Fuse Holder https://a.co/d/39eNee8 
• Fuse Holder Inline https://a.co/d/gIgcdz7 
• Expandable Braided Cable Sleeve This is enough to do your entire printer.  ¼ will work for just Leds
• 12V Cuttable LED Light Strip: https://www.aliexpress.com/item/3256805169233733.html…
• 18AWG Wire w.aliexpress.com/item/2251832856004807.html...

Instructions on adding  a LEDs to Bottom of Print Head 

What to buy: 

24v Pre Wired-LED   

Schematic of Print head.