
Khớp nối đa năng dựa trên servo 9G
- Downloads
- 114
- Likes
- 23
- Views
- 1,731
- Remixes
- 1
- Comments
- 4
Files 3 757.7 KB
- Ball_Joint_Axis_v6_1766294859.stlSTL · 79.6 KB
- Ball_Joint_Core_v6_1766294860.stlSTL · 271.8 KB
- Ball_Joint_Arch_v6_1766294861.stlSTL · 406.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #34234
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
I designed this universal joint from scratch, with the idea to use it in the shoulder / hip joints of a robot dog I´m working on. (I hope I upload that soon too).
My main motivation was to get a universal joint with two DoF in one place, since that is what we mammals have in out shoulders and hip.
You'll see the design steps I wen though to get to were I am now. It is designed to fit the Tower Pro 9g micro servos
I know the print quality is not the best, sorry for that. The parts were printed with a cheap plastic (that looks like never ends!)
I'll upload new pictures as soon as I print with another (better) PLA.
Print Settings
Supports:
No
Notes:
You'll need to print:
* 2 Arch * 2 Axis * 1 Core
Post-Printing
Assemble instructions
To assemble this Servo based universal joint you should follow this steps:
- Get two servo horns and cut them to fit into the core of the joint.
- Attach the cut servo horns to the core using the servo screws (you'll need to make the hole a little bigger, but that can be done just screwing the screw)
- Place the core into the first arch
- Put the first servo into its place in the first arch
- screw the servo horn into the servo, through the opossit hole in the core
- Do that same thing (steps 3 to 5) with the second arch and servo
Category: Robotics
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 757.7 KB
- Largest file
- 406.3 KB
4 comments
You may also like 12 models
See all-

-
New -

-

-
New -

-

-

-

-

-

-



