BeamCase - Bracket gắn quạt dạng slot-in

This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm and 140mm fans. The bracket is secured to the fan with standard fan screws and then it slots into the frame on one side and is screwed to the profile on the opposite side (from the inside)

This bracket is optimal to add fans in a space efficient and very secure and way which ads strength to the case, and at the same time they are still easy to remove. 
 

These brackets are designed to work together with the modular BeamCase SFF case which can be found here.
 

Required Hardware

Screws: 
M3x8mm countersunk screws (1pcs per bracket)
standard fan screws (come with your fans)

Nuts: 
stanadard M3 nuts (1pc per bracket)

Print Instructions:

Ideally print this model in a stronger and more temeperature resistant filament like PETg or ABS. In order for the bracket to work perfectly it has to be printed accurately, so compensate for shrinkage. This print like all BeamCase parts does not require any supports. 

I adjust for ABS shrinkage by scaling the model to 100.5% (Bambu Lab P1S and Sunlu ABS) , but it depends on the filament and printer and print speed.