Giá treo điện thoại gắn tường (hỗ trợ Samsung/iPhone/có ốp)

Wall mounted cell phone holder. I personally did this for my Samsung S8+ which has a case as well, so this specifically fit that pretty well. Though the result is something that can work/hold multiple types of phones securely, some with cases depending on thickness/width of the device.

The opening at the bottom is to feed a charger cable to which is centered for the S8+.

Could also be mounted on the wall with simply an adhesive of some sort instead of screws.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

25%

Filament: Tianse PLA Black

Notes:

I usually feed the power cable through one of the side slots so it can hang from the mount as well since it feeds up from the outlet by the floor.

Post-Printing =============

Secured in this case with 2 small screws though regular adhesives could be used to avoid any holes in the wall if thats a concern.

This original design was for an S8+ with a case, though smaller phones like the S5 above fit fine, just have extra wiggle room.

How I Designed This ===================

Hardware/Software Used

Modeling: Fusion 360
Printer: Creality Ender 3

PLA: Tianse Black PLA

Slicing: Simplify3D

Category: Mobile Phone