
Replica .277 SIG Fury & snap cap (dummy round) – mô hình 3D
- Downloads
- 163
- Likes
- 25
- Views
- 593
- Remixes
- 0
- Comments
- 0
Files 6 10.8 MB
- 277SigFury_cartridge_1777187930.stlSTL · 2.6 MB
- 277SigFury_bullet_1777187931.stlSTL · 3.6 MB
- 277SigFury_case_1777187932.stlSTL · 1.3 MB
- 277SigFury_base_1777187933.stlSTL · 480.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #340670
- Category
- Cosplay
- Published
Description
.277 SIG Fury, also known as .277 Fury, 6.8x51mm, or 6.8 Common Cartridge, is a centerfire rifle cartridge developed by SIG Sauer in 2019.
Print this for props, display, education, training, just because it's cool, or scale it up to become a container.
Contains 6 files:
- Accurately sized replica: 277SigFury_cartridge.stl
- Separate bullet, case, and case head/base pieces for easily printing in different colors: 277SigFury_bullet.stl, 277SigFury_case.stl, and 277SigFury_base.stl
- Snap cap/dummy round for cycle and dry fire practice, with firing pin hole and reduced bullet size: 277SigFury_snapcap.stl
- Information txt file with recommended print settings: 277SigFury_info.txt
Originally uploaded on Cults3d: https://cults3d.com/en/3d-model/various/277-sig-fury-dummy-round-replica-and-snap-cap
Print Settings:
- Material: Tested with PLA and PLA+/PLA Pro.
- Overall print size: 71.76mm tall, 11.99mm diameter.
- Layer Height/Quality: 0.16mm or less recommended, 0.12mm works best.
- Infill: 20% is fine for display, 60% or more recommended for snap cap use.
- Print Speed: 50mm/s or less recommended. I do 40mm/s for cartridge, snap cap, and case piece; then 30mm/s for bullet piece. I also do 10mm/s initial layer speed.
- Adhesion: A brim might be needed, depending on the printer and bed type. I have a textured PEI bed, and with proper calibration, additional adhesion isn't needed.
- Post print: The pieces may require some sanding or filing for proper fitment if the bottom layers bulged out a little. Fitment should be a little snug, but easy to take in and out. A properly calibrated setup shouldn't need additional work.
Print spec
- Formats
- stltxt
- Model files
- 6
- Total size
- 10.8 MB
- Largest file
- 3.6 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-

-
![Destiny 2 – Necrochasm [Anointed Ornament]](https://cdn.f3d-ai.com/uploads/public/6a5/b27/6fe/6a5b276fe2b82926583024.jpg?class=sq800)
-

