Destiny 2 – Necrochasm [Anointed Ornament]

Destiny 2 – Necrochasm [Anointed Ornament]

Bring Necrochasm with the Anointed Ornament from Destiny 2 to your collection with this detailed replica model!

This upload includes multiple file formats, so you can either print immediately using the included profile or make your own adjustments depending on your machine and preferences.

As far as I’m aware, this is currently the only printable model of the Necrochasms [Anointed Ornament] available. I put a lot of time into recreating and preparing this model for printing, so if you enjoy it, a rating, make, follow, or quick thank you is always appreciated.

Included Files

STL files – separated and ready for slicing

BLEND file – editable source file for scaling, modifications, or custom preparation

3MF project file – includes my recommended print settings and layout

Pre-oriented parts where applicable for cleaner printing and easier assembly

Recommended Print Settings

These are the settings used for the preview print. Adjust them as needed for your machine and filament.

Printer Type: FDM
Layer Height: 0.20 mm
Initial Layer: 0.24 mm
Walls: 2
Top / Bottom Layers: 3
Infill: 5–8% Gyroid or Cross Hatch
Supports: Yes – build plate only where possible
Brim: Recommended, 7–10 mm
Nozzle: 0.4 mm
Material: Silk PLA+ or PLA+ recommended

Print Notes

Printer: FlashForge AD5X

The model has been split into multiple parts to reduce support use and improve surface quality.

Dry-fit all pieces before gluing. Depending on your printer and material, some joints may require light sanding or gentle heating to adjust the tolerances.

Sanding, filler primer, and paint will provide the best final finish. Acrylic paint markers can also work well for smaller details.

The model can be scaled in your slicer if required.

The included 3MF contains my setup as a starting point, but results may vary between printers, materials, and slicers.

Assembly

Clean all support contact points before assembly.

Use CA glue or another plastic-safe adhesive.

Test the alignment and fit of every part before final bonding.

For the cleanest result, fill and sand visible seams before priming and painting.

Disclaimer

This is a fan-made recreation inspired by Destiny 2 and is intended for personal use, display, and cosplay purposes.

I do not own the original design rights to Destiny, Necrochasm, the Anointed Ornament, or any associated assets.