Skip to main content
F3D
Giá treo dụng cụ dẹt cho panel treo dụng cụ Raaco 1

5 images

DIY

Giá treo dụng cụ dẹt cho panel treo dụng cụ Raaco

Remix of Bộ móc treo dụng cụ Raaco (Pegs) tiện lợi cho bảng treo By Mwirenfeldt_250382

By MagnusKaiser_1642231

Downloads
132
Likes
29
Views
842

Files 3 202.2 KB

  • Rack_for_flat_tools_-_2_slots_1777166036.3mf3MF · 92.5 KB
  • Rack_for_flat_tools_-_4_slots_1777166037.3mf3MF · 94.4 KB
  • Single_Universal_Clip_1777166038.stlSTL · 15.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A rack for flat tools like files, chisels or scrapers that sits nicely onto the Raaco tool wall panels. 

There is a version with 4 slots and a version with 2 wider slots. I have found the one with 2 slots the most usefull so far. 

Can be locked place in using a 3x10 mm screw.  

Print instructions

To print this you need 3 parts.

2x Single Universal Clip

1x Rack for flat tools - 4 slots or 2 slots

Print with PETG - 4 perimeters

Infill amount at your own preferences. 

Assembly

There is no fancy connection, just a square tap that fits into a square hole. With the tolerances on my printer (not fine tuned) I don‘t need any glue, but if it’s too loose when you print it, just give it a dap if superglue and you should be fine. 
 

Further remixing

I‘ve chosen the simple square connection to make it easier for you to design your own custom tool holder. All you need is to make af square hole into your part that is 10x10x10 mm.

In that case you can just download the Single Universal Clip and utilize it for your custom parts.

Add a 3 mm “countersink” above the hole if you want your custom tool holder to be flush with the wall. 

I've made the rack this size to fit onto my Prusa Mini. 
I can fairly easy make larger versions later for bigger print beds.

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
202.2 KB
Largest file
94.4 KB

0 comments

See all