Skip to main content
F3D
BEE HOTEL – Nhà cho ong treo cây (BEE HOTEL) 1

5 images

Đồ Gia Dụng

BEE HOTEL – Nhà cho ong treo cây (BEE HOTEL)

By multilayers_1378581

Downloads
206
Likes
58
Views
1,786

Files 2 89.8 KB

  • bee_hotel_1_1777101794.stlSTL · 30.2 KB
  • bee_hotel_2_1777101795.stlSTL · 59.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

BEE HOTEL (HOUSE)

Originally I designed these in Tinkercad and printed around 6 of these small bee hotels that I hanged down from various trees in the garden. I printed these out on an Ender 3 using PETG. After experimenting with temperature settings I found that a 250deg nozzle temperature is preferable to the default of 230deg. Also the bed temperature was set at 70degree on a glass bed.

The following settings should work in any slicer program.

Infill Density - 10% , Infill Pattern - Grid (or another similar one like honeycomb if available)

Top layers - 0

NOTE: Increasing Infill Density reduces hole sizes (adjust this to get sizes you want)

Size is 90mmX90mm (adjust to your requirements).

The models I have put up are an improvement on the first batch and were designed in onshape. I am experimenting with various infill patterns (including honeycomb) and trying both PLA and PETG on various printers.

I included 2 variants (hang down attachment only and a combination of screw in and hang down attachments)

For the screw in variant use a modifier cube to select the screw in bottom part and add 3 or 4 top layers to the modified part.

Good luck printing and attracting bees to your garden.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
89.8 KB
Largest file
59.7 KB

0 comments

See all