Stenny Blaster – Blaster Flycore FTW nạp hông kiểu Sten

Stenny is a fairly simple and basic blaster that is intended for maximum style points.  Utilizing OFD's Flycore with straight magazines with FTW geometries (get it here… https://www.printables.com/model/286951-ofd-flycore-straight-talon-design-your-next-printe ).  It utilizes the Flycore mounting points into the front receiver.  You will need some glue/epoxy, a lot of M3 bolts (some are going to be pretty long), M3 heat set inserts, 2 large size switches, a couple Nerf screws, optional volt meter, small spring for the mag detent.  Unlike the original Sten, this comes in a version for LEFT HANDED foam flingers.  The files are identified as left and right where they differ, otherwise parts are universal for both sides and I have taken care that things like the collar threading work on left and right.  There are multiple options for the battery door and stocks.  The switches are mounted side by side and you will need to do some bending of the lever arms to get them to click sequentially based on trigger travel.  The trigger has a springer style pivot rather than sliding back and forth.  The stock prints in two halves (you can change colours) and is designed for strength printing flat and glued to a stock length that you like.  I have included a view of print orientation, I suggest support blocking holes where bolts and heat inserts would go.

Have fun and enjoy defending the Commonwealth against the zombie hordes.

All rights and property of the Flycore design is owned by OldFusionDesigns.