
Septa/Sleeve Stopper tham số cho ống, chai & ống NMR (Parametric)
- Downloads
- 112
- Likes
- 22
- Views
- 469
- Remixes
- 0
- Comments
- 0
Files 10 529.4 KB
- septas-v1_1776978925.scadSCAD · 5.4 KB
- septas-d05_1776978926.stlSTL · 37.4 KB
- septas-d05_h_1776978927.stlSTL · 74.9 KB
- septas-d10_1776978928.stlSTL · 37.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #332006
- Category
- Sức Khỏe
- Published
Description
Parametric septa / sleeve stoppers generator and stl examples for tubes, bottles & NMR tubes. Few samples have been provided too.
It contains a table to generate septas from 3 to 35mm in diameter, and the option to create custom septas defining the lower and high diameter. It also has the option to add a hole in the plug for a better seal and use less material.
Ideally print in TPU, with 3 walls in bottom/top/walls. Check the infill depending of your requirements, but if you go for something big then it would be more difficult to squish and seal the tube. a 5/10% feels ok with my 95A geeetech. For the ones with hole print them with the hole pointing up.
notes:
- if you try to use a huge difference between the two diameters with hole, the use of supports can become mandatory. I used a difference of 1 or 2mm between the two diameters in all the provided septas.
- avoid the holes in the small septas. The strining can become a huge problem.
- Be sure that your TPU is dry, and your printer well calibrated for that filament
- I'm not currently working in a lab. I used hollow cylinders printed with transparent 3dfils PLA for the demo (but please, use only PLA here for household or decoration)
Print spec
- Formats
- scadstl
- Model files
- 10
- Total size
- 529.4 KB
- Largest file
- 74.9 KB












