Trạm Espresso Tham Số (Parametric Espresso Station)

This is an easy way to customise an espresso station to your needs. Just edit the parameters and you have yourself a perfect addition to your coffee career. 

There are some STLs made for my 58.55mm setup. If you change the parameters remember your tolerances – .2mm works for my Creality K1 for easy removal of parts. As this is best if made in wood, I would test the size and tolerances using a lightning infill for speedy printing. The two separated pieces print in 4h25m total in this way. 

If you have any feedback or suggestions please add them in the comments.

Parameters:

• Tamper_B 
o Diameter of base of tamper
• Tamper_T
o Diameter of top of tamper (the wider part that rests on the basket)
• Tamper_H
o Depth that tamper rests
• Tamper_W
o Width of top of tamper
• Funnel_O
o Outer diameter of funnel
• Funnel_H
o Depth that funnel rests
• Distributer_O
o Outer diameter of distributer
• Distributer_H
o Depth that distributer rests
• Portafilter_H
o Distance between surface and where portafilter handle rests
• Portafilter_Handle
o Width of portafilter handle
• WDT_O
o Diameter of Weiss Distribution Tool (Could also be used for spray bottle)
• WDT_H
o Depth that WDT rests
• PuckScreen_D
o Diameter of Puckscreen
• PuckScreen_W
o Width of slot
• PuckScreen_H
o Depth of slot
• Spacing
o Spacing between parts. Adjust until pleased with looks. (Default 15mm)
• Station_L
o Length of station
• Station_W
o Width of station
• Station_H
o Height of station
• Bottom_H
o Distance between base and where objects sit
• Fillet_S
o Size of the fillets on the side. Adjust until pleased with looks. (Default: 20mm)
• Fillet_D
o Size of fillet in cutout. Adjust until pleased with looks. (Default: Portafilter_Handle/3 = 10mm)
• Chamfer_T
o Size of the chamfers on the top and in the cutout. Adjust until pleased with looks. (Default: 3mm)