
Kẹp Gắn Ô/Gậy Cho Balo Có Quick Release
- Downloads
- 595
- Likes
- 537
- Views
- 6,736
- Remixes
- 0
- Comments
- 0
Files 4 854.4 KB
- umbrella_holder_1-3mm_1776930306.stlSTL · 418.9 KB
- umbrella_holder_3-6mm_1776930307.stlSTL · 417.2 KB
- tpu_pad_1776930309.stlSTL · 18.1 KB
- about_1776930314.txtTXT · 225 B
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #330063
- Category
- Dụng Cụ Tiện Ích
- Published
Description
Umbrellas are the best way to stay dry on a rainy day, and their main downside is that one has to hold it. This model solves this by making your backpack hold your umbrella for you ! Also works with sticks or other long and thin objects
This is a system to attach your umbrella to a backpack. The system uses two jaws in a wedge motion to secure the umbrella: Put the stick in the jaws, press down firmly and voilà! The device can hold any long object with a diameter between 8 and 18mm. This allows to release the umbrella in an instant. The device can be easily added and removed on a backpack thanks to its clip system.
The base device is print in place and works out of the printer, but optional TPU pads can be added for a more secure grip. No screws or other additional hardware required.
If you wish to adapt the model, see the about.txt file.
Printing:
Umbrella holder:
- Choose the one based on your backpack. Best is to measure the thickness of your backpack straps with a caliper. Squeeze mildly as you measure to emulate the action of the clip system.
- Print in PLA with a layer thickness of a least 0.2, the layer lines help hold the wedges in place.
- Infill of at least 15%, cubic would be a good choice.
- At least 3 perimeters.
TPU pads:
- Make it squishy.
- Layer height of 0.15
- Only 2 top and bottom layers
- 20% 3D honeycomb infill.
Print spec
- Formats
- stltxt
- Model files
- 4
- Total size
- 854.4 KB
- Largest file
- 418.9 KB
0 comments
You may also like 12 models
See all-

-
New -
New -
New -
New -
New -

-

-

-

-

-


