
K1 Max: Fix cable chain bị gãy bolt + PTFE guide
Remix of K1 max - Khắc phục dây xích By FranticOstri_1964008
- Downloads
- 200
- Likes
- 31
- Views
- 1,774
- Remixes
- 0
- Comments
- 0
Files 3 2.4 MB
- PTFE_Guide_v2_1776919495.stlSTL · 148.8 KB
- K1_Max_Broken_Bolt_Fix_-_3mm_heatset_insert_1776919495.stlSTL · 2.2 MB
- M3_-_M4_adapter_1776919497.stlSTL · 65.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #329555
- Category
- Máy In 3D
- Published
Description
If you have broken the bolt for the cable chain on your K1 max like me you will be looking for a fix.
I didn't have any 4mm bolts and nuts so changed the models to work with a heatset insert and 3mm bolt. To adapt the 3mm bolt to the 4mm hole I have included a small sleeve.
Mine were printed in PETG-CF and work perfectly.
The specific models were chosen because one fixes the broken bolt issue and the other provides a swivel guide to help the filament enter the extruder smoothly.
The stock cable chain has a shoulder bolt but as I didn't have any of those available I used a regular 3mm cap head bolt. Do not tighten too much or the cable chain won't swivel. The bolt has a tendence to work it's way out so alittle light strength thread locker is needed.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 2.4 MB
- Largest file
- 2.2 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -

-

-
New -

-

-

-


