Vỏ Heltec Wireless Paper cho Meshtastic (SMA Antenna)

Released on 16 Feb 2024 by Blueskies .
Improved version on 22 June 2024

These models are intended for personal use only. 
Do not copy, sell, trade or gain from these files and designs. 
This means you can print for yourself, for your family members, friends and make the devices and give away the printed enclosures for free to them to built the Meshtastic community but cannot gain financially from the sales of them. 

Do consider contributing to the Meshtastic Community at https://meshtastic.org/docs/contributing/#supporting-and-contributing-to-meshtastic

Installation Video

You will need:
- 1 Unit of Heltec Wireless Paper (with SMA Antenna) - I use version 1.1 here
Buy at https://s.click.aliexpress.com/e/_DDjdK3R

 -4 units of M3 x 20 mm (Hexagonal Sock Head Cap  and Nut)
- Print out the 4 files below, 1 each
- (Optional: Battery)
   I use  a MakerFocus 1000 mAh Battery (dimension 44 mm x 26 mm x 10 mm).
  Recommended Maximum battery size is  (dimension 52 mm x 29 mm x 10 mm)

View step by step video on how to install the printed parts below

There are 4 files. STLs already in suggested printing orientation. 
Print a lower speed especially for top and bottom files.

• Blueskies-Heltec-Wireless-Paper-Top (1 x) - 
  No support required.

• Blueskies-Heltec_Wireless_Paper_Bottom(1 x) 
  Please add support below the 2 button holes.

• Blueskies-Heltec-Wireless-Paper-MiddleFrame (1 x) 
  No support required

• Blueskies-Heltec-Wireless-Paper-Button (1 x)

  For personal use only.