
Kẹp Cáp/Dây (Dễ In) – Cable / Wire Clip (Easy To Print)
- Downloads
- 173
- Likes
- 29
- Views
- 616
- Remixes
- 0
- Comments
- 0
Files 2 261.9 KB
- Cableclip_m3CS_1776848628.STLSTL · 155.3 KB
- Cableclip_Hexagonal_M3CS_1776848628.stlSTL · 106.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #326181
- Category
- DIY
- Published
Description
3D-Printed Cable Clip
Product Overview:
The 3D-printed cable clip offers a sleek and simple design, perfect for organizing cables and wires with diameters ranging from 2mm to 12mm. Its versatile and minimalist appearance makes it an ideal solution for tidying up cables in various settings, whether under tables, on walls, or any other flat surfaces.
Key Features:
Material Compatibility: The cable clip is recommended to be printed using PETG or ASA for optimal durability and strength. For indoor use with smaller cables, PLA can also be a viable option. These materials provide good flexibility and strength, suitable for securing various types of cables.
Dimensions: The clip measures 35mm in length, 20mm in width, and 13mm in height, making it compact and easy to install in a wide range of spaces.
Installation Methods: The clip can be attached to surfaces in two ways:
- Double-Sided Tape: Use foam-type double-sided tape, ideally 1-2mm thick. Cut a piece measuring 30mm x 20mm and adhere it to the bottom of the clip before installation. This method provides a quick and clean attachment.
- M3 Screw: The clip features a countersunk hole for an M3 screw, with an additional hole on top to accommodate the screw head. This method offers a more permanent and secure attachment.
Strength and Durability: While the maximum load capacity has not been explicitly tested, the clip's 2mm thickness provides robust support for various cable weights. The strength will vary depending on the print settings, including the number of walls, bottom and top layers, and infill percentage. The choice of material also influences the clip's durability.
Suggested Print Settings:
- Layer Height: 0.1 - 0.2 mm
- Walls: 5+
- Top/Bottom Layers: 3-4
- Infill: 50%+
Applications:
This cable clip is suitable for organizing cables in homes, offices, workshops, and more. It's a practical tool for managing computer cables, electronic wires, or any other loose cables that need to be kept in order. Its flexible installation options make it a convenient choice for various environments.
-Added version with hexagonal hole on top, makes the model even easier to print.
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 261.9 KB
- Largest file
- 155.3 KB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-
New -

-

-

-

-

-


