Skip to main content
F3D
Vỏ đồng hồ đo điện cho máy in 3D… 1

5 images

DIY

Vỏ đồng hồ đo điện cho máy in 3D (3D Printer Power Meter Case)

By WiZeus_229741

Downloads
20
Likes
1
Views
748
Remixes
1

Files 4 700.6 KB

  • PowerMeter_Case_Mounting_piece_1776841711.stlSTL · 172 KB
  • PowerMeter_Case_Back_1776841712.stlSTL · 34.7 KB
  • Power_Meter_Case_v26_1776841712.f3dF3D · 344.8 KB
  • PowerMeter_Case_Main_1776841713.stlSTL · 149.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

This is a case for a Power Meter Module which measures:

Voltage, Power, Current, Power-factor, Energy Usage and Frequency.

It might be a good idea to add a fuse into the case, electrically before the Power Meter circuitry in case something goes wrong.

The case is designed for the "20A" version which does not use a current transformer to measure current: https://www.aliexpress.com/item/20A-100A-AC-LCD-Digital-Panel-Power-Watt-Meter-Monitor-Voltage-KWh-Voltmeter-Ammeter-Tester-Tools/32934531215.html

A KCD4 rocker switch is used to completely turn off the Power Meter and output: https://www.aliexpress.com/item/5pcs-2-Position-Red-Light-Rocker-Switch-16A-250V-KCD4-20-4-Pin-ON-OFF-Toggle/32815632983.html

The additional mounting pieces can be used to clamp / screw down the angled stands of the case. Unfortunately the LCD used in the Power Meter does not have great viewing-angles, especially when looking from a high angle the LCD becomes unreadable.

You might able to see it on my picture that I didn't choose a steep enough angle for the triangles under the main case. This meant that I could not read the display with the case mounted on my printer's desk when I was standing right in front of it. I rose the front of the case with two screws.

You can adjust the model, I have included the Fusion 360 file.

WARNING: MAINS VOLTAGE CAN BE LETHAL! I take no responsibility for any damages or injuries. Only qualified personnel should work with live (mains) circuits!

If you build this project and want to give me something back in return, I'd be extremely happy to see a post under "Makes"! :)

Printer:

Tronxy X8

Rafts:

No

Supports:

No

Resolution:

0.2mm and up

Infill:

100%

Category: 3D Printing

Read more Show less

Print spec

Formats
f3dstl
Model files
4
Total size
700.6 KB
Largest file
344.8 KB

0 comments

See all